-
SOBRE NOSOTROS
-
-
Producto
Contacto
Whatsapp:+8613803173756
Teléfono:+8615803175616
Correo electrónico:christina@mingyang-machinery.com
Add1: Zona Industrial de Embalaje, Condado de Dongguang, Ciudad de Cangzhou, Provincia de Hebei
Add2: 1108-1109, Torre A, Tauro, Plaza Wuyue, Distrito de Yunhe, Ciudad de Cangzhou
MHK-001
Máquina troqueladora de alimentación de papel de borde de ataque totalmente automática con limpieza de banda, prensado plano
El dispositivo de alimentación de papel frontal de precisión de alta velocidad puede transportar de forma estable varios tipos y calidades de papel corrugado, con gran adaptabilidad y amplio rango de trabajo.
palabra clave:
Categoría:
- Descripción del producto
- Parámetro técnico
-
- Nombre del producto: Máquina troqueladora de alimentación de papel de borde de ataque totalmente automática con limpieza de banda, prensado plano
- Código de producto: MHK-001
1. Leading Edge Paper Feeding Section
◆ High speed precision leading edge paper feeding device can stably transport various types and qualities of corru-gated paper, with strong adaptability and wide working range.
◆ Special polyethylene glycol paper feeng rubber wheels, combined with a fence type paper holder and air cushionensure smooth delivercardboard and the placement of cardboard.
◆ Frequency conversion air suctio!:to adapt to the paper feeding requirements of corrugatedpaper with different thicknessesTrOto 5 lavers.
2. Paper Feeding Table Side Positioning Part
◆ One set of side positioning push back on the left and right sides to ensure accurate positioning on the cardboard side.
◆ Advanced non-stop adjustment for paper feeding step adjustment.
◆ The front and rear positions of the front gear can be slightly adjusted according to the bite size.
3. Die-Cutting Section
◆ Die cutting operation door and pneumatic plate frame locking system.
◆ The air cushion lifting device for die cutting steel plates makes it easier to pull out and push in the die cutting steel plates.
◆ The main transmission side-precision gear transmission.
◆ The cam type intermittenthanism with large movement angle and high torque makes the operation of thepaper gripper tooth row morereducing the difficulty of dot printing and plate scattering, and isequipped with a reliabletorque protection svstem.
◆ Handle wheel wedge type pressure trimming device with gravity position display.
4.Waste Cleaning Department
◆ The horizontal fixed waste removal middle template cooperates with the progressive acceleration movement curveto remove the waste on the upper frame and hit the waste point, The waste removal structure is simplified, the actionis reduced, and the impact of the hit point is increased instantaneously, making the waste removal action moresimple and effective.
◆ When the tooth row stays at the waste cleaning section, it is positioned by a gauge, making the waste cleaning positioning more accurate.
◆ Adopt a central positioning system, which is fast and easy to adjust.
◆ The front waste removal device can completely remove the waste from the paper biting edge, and the paper bitingedge waste is sent out of the machine by a conveyor belt.
5. Counting And Stacking Paper Receiving Section
◆ The non-stop pneumatic automatic paper receiving rack and automatic lifting bracket are usedalternately with the paper receiving table, which can be counted and stacked, and transported to theoutside of the machine with a belt (can be connected to an automatic paper separator).
◆ Electronic counter.
◆ After the adjustable spring chain is tensioned, the bufer driven wheel greatly reduces the inertia impact of the toothrow steering, and can maintain the balanced tension of the chain.
◆ Adopt the lower suction tray type non-stop paper feeding method.
◆ The pneumatic side push baffle is used to push and tidy the paper stack in advance.
◆ Vacuum adsorption method is used to feed the paperboard into the press roller, which is not easy to scratch theprinting surface.
-
Main parameters Model MHK-1900FC/
1900EFC-1900ECMHK-1900FC/
1900EFC-1900ECMHK-1500FC/
1500EFC-1500ECMHK-1300FC/
1300EFC-1300ECMax. sheet size 1900x1400mm 1650x1200mm 1500x1100mm 1290x940mm Min. sheet size 650x550mm 550x500mm/550x
500mm/650x450mm470x420mm/470x
450mm/550x450mm470x420mm/470x
450mm/550x450mmMax. die cutting size 1870x1380mm 1620x1180mm 1480x1080mm 1280x920mm Inner chase size 1900x1430mm 1650x1230mm 1520x1130mm 1310x970mm Stock range E,B,C,A and AB flute corrugated paper(1-8.5mm thickness) Min,gripper waste 12mm 12mm 12mm 12mm Min. gripper margin 6-12mm 6-12mm 6-12mm 6-12mm Cutting rule height 23.8mm 23.8mm 23.8mm 23.8mm Max. die cutting speed 5500s/h 6000s/h 6000s/h 6000s/h Max. die cutting pressure 450T 400T 400T 400T Total power required 40kw/38kw/38kw 40kw/38kw/38kw 32kw/30kw/30kw 27kw/25kw/25kw Electrical power 380V,50HZ 3PH 380V,50HZ,3PH 380V,50HZ,3PH 380V,50HZ3PH Mobile lower platen adjusting range ±1.5mm ±1.5mm ±1.5mm ±1.5mm Machine dimension 13000x6200x2780mm
(FC/EFC)11700x5470x2500mm
(FC/EFC)11800x5000x2400mm
(FC/EFC)10630x4820x2400mm
(FC/EFC)15000x6200x2780mm
(EC)13250x5470x2500mn
(EC)12500x5000x2400mm
(EC)12000x4820x2400mm
(EC)Machine weight 41T/13T/39T 26T/38T/34T 25T/26T/23T 22T/23T/20T
Bienvenido a dejar un mensaje
Línea directa de servicio
Cangzhou Mingyang Machinery Co., Ltd
Teléfono:+86 13803173756
Correo electrónico:christina@mingyang-machinery.com
Add1: Zona Industrial de Embalaje, Condado de Dongguang, Ciudad de Cangzhou, China
Add2: 1108-1109, Torre A, Tauro, Plaza Wuyue, Distrito de Yunhe, Ciudad de Cangzhou
